Saving is one of the important aspects that one should take into consideration if he or she expects a better life in future. Although people tend to save mostly from putting a side part of their income, saving can also be done through using other methods such as acquiring second hand things or refinishing furniture. In the city, Hudson, MA, furniture refinishing Massachusetts can be done using the following steps.
The first step involved is through removal of the old finish. The step is often tedious because of the work that one will have to do in order to complete the process. One can decide to use the sanding technique which involves using a sand paper to get rid of finish that has remained. Then removal of any paint or stains using a higher grit of sand paper. Another technique is through the use of chemical strippers where the chemical is applied to get rid any old finish.
The second process is by preparing the wood. One will have to use a sand paper on the wood in order to make smooth the rough places and get rid of any old finish that was left. This is despite having used the chemical stripper technique in the beginning. Afterwards, one will still use sand with grain in order to make the complete furniture smooth.
The third step is considered optional since it depends with the kind of grains that the furniture is made up of. It is the furniture that do consist of tight grains that will not need grain fillers while those that consist of open grains will need the grain fillers. In order to apply the fillers, one will use mostly a paint brush and a plastic material to get rid of any excess filler. The wood will be sanded lightly with the grain once the filler has dried out.
In approaching the final stage of staining, one will need a sand sealer to finalize. The work of the sand sealer is to help apply the stain evenly on the complete wood. This will be followed by a thick coat to be applied all over the piece and if the coat is in excess, a rag can be used of wipe off the excess coating.
It is important to note that in staining, one can decide to use either the oil or water based. The oil based suits most people since it lasts longer. One can also use the one step finish or the gel stain. It is also crucial to follow the instructions provided by the manufacturer about the product when in stain application.
At the finish level, one will have to put into consideration the kind of finish to be used. One will have to know what he or she will be looking for, the durability of the finish, the level of skill that he or she possess and how the things acquired are supposed to be used. By choosing the right products for the work, the outcome will be great.
Having followed these steps, the furniture will have new life and have a presentable appearance. This will enhance durability and more so help one save money instead of always having to buy new furniture after a short period of time.
The first step involved is through removal of the old finish. The step is often tedious because of the work that one will have to do in order to complete the process. One can decide to use the sanding technique which involves using a sand paper to get rid of finish that has remained. Then removal of any paint or stains using a higher grit of sand paper. Another technique is through the use of chemical strippers where the chemical is applied to get rid any old finish.
The second process is by preparing the wood. One will have to use a sand paper on the wood in order to make smooth the rough places and get rid of any old finish that was left. This is despite having used the chemical stripper technique in the beginning. Afterwards, one will still use sand with grain in order to make the complete furniture smooth.
The third step is considered optional since it depends with the kind of grains that the furniture is made up of. It is the furniture that do consist of tight grains that will not need grain fillers while those that consist of open grains will need the grain fillers. In order to apply the fillers, one will use mostly a paint brush and a plastic material to get rid of any excess filler. The wood will be sanded lightly with the grain once the filler has dried out.
In approaching the final stage of staining, one will need a sand sealer to finalize. The work of the sand sealer is to help apply the stain evenly on the complete wood. This will be followed by a thick coat to be applied all over the piece and if the coat is in excess, a rag can be used of wipe off the excess coating.
It is important to note that in staining, one can decide to use either the oil or water based. The oil based suits most people since it lasts longer. One can also use the one step finish or the gel stain. It is also crucial to follow the instructions provided by the manufacturer about the product when in stain application.
At the finish level, one will have to put into consideration the kind of finish to be used. One will have to know what he or she will be looking for, the durability of the finish, the level of skill that he or she possess and how the things acquired are supposed to be used. By choosing the right products for the work, the outcome will be great.
Having followed these steps, the furniture will have new life and have a presentable appearance. This will enhance durability and more so help one save money instead of always having to buy new furniture after a short period of time.
About the Author:
You can get excellent tips for choosing a provider of furniture refinishing Massachusetts services and more information about a reliable service provider at http://specialtyfurniturerefinishing.net now.
Brak komentarzy:
Prześlij komentarz